Wider Coverage. Cleaner Signal. Fewer Nodes. Proprietary RPU™ technology targets the hard-to-reach corners of large homes, with up to 15,000 sq. ft. of combined indoor-outdoor coverage in company testing.

NEW YORK, Oct. 30, 2026 /PRNewswire/ — WavKong today announced the commercial launch of its V2700 long-range Wi-Fi 6 router following the successful fulfillment of all Kickstarter orders. Its approach to whole-home Wi-Fi is built on a simple principle: Improve the wireless signal at its source, then use the fewest nodes necessary to deliver reliable coverage across even the largest or most complex homes.

From the upstairs bedroom where a daughter streams and studies, to a garage, a backyard gathering, or a security camera on a barn, reliable Wi-Fi should reach the places people actually use—not just the room closest to the router.

Developed over six years, WavKong’s proprietary RPU™ (Radio Processing Unit) chip brings base-station-grade digital signal processing to home Wi-Fi. In company testing at a single-story, wood-frame residence in California, one V2700 provided up to 15,000 square feet of combined indoor-outdoor Wi-Fi coverage. WavKong has also tested the router in three-story wood-frame homes in other U.S. states.

The Problem Isn’t Always the Internet Plan. It’s the Last Stretch of Wi-Fi.

A household can pay for fast broadband and still lose usable speed at the edges of the property. A phone may show a Wi-Fi connection in the garden, yet a video call freezes. A camera on an outbuilding may connect intermittently. A bedroom two floors away may become a daily dead zone.

Mesh networking is an effective way to extend Wi-Fi coverage, especially in homes with challenging layouts. But the best network is not necessarily the one with the most nodes. Each additional wireless point requires thoughtful placement and coordination of radio channels, backhaul and roaming. For households that are not networking experts, getting that design right can be difficult.

WavKong focuses on strengthening the underlying wireless link so fewer nodes may be needed to deliver dependable coverage. In many suitable homes, one V2700 can be enough. Where building materials or layout call for more coverage, two properly positioned V2700 units can work together in a Mesh network to deliver high-speed whole-home Wi-Fi. The goal is not to eliminate Mesh; it is to make the network simpler by needing fewer nodes.

The Technology: Cleaner RF, Not Just More Power

The V2700’s RPU™ targets a fundamental radio-frequency challenge. As a Wi-Fi power amplifier operates at higher output levels, nonlinear distortion can compromise signal quality, limiting the speeds devices can sustain at longer range. Digital predistortion compensates for that distortion before transmission, helping preserve signal linearity.

Digital predistortion (DPD) algorithms have long been used in cellular base stations and satellite communications. WavKong has brought this class of digital RF processing into the 5 GHz radio path of a home Wi-Fi router through its dedicated RPU™ chip—adding a digital processing core to the radio system to compensate for power-amplifier distortion. Its engineering team brings decades of experience in mobile-communications algorithms, RF systems, and communications-chip development.

In laboratory testing at 160 MHz channel bandwidth and 1024-QAM, DPD improved error vector magnitude (EVM) from approximately −29.3 dB to −41.2 dB, a gain of more than 12 dB. In everyday terms, cleaner RF transmission helps maintain usable speeds farther from the router. Small Chip. Giant Leap.

What the Tests—and Early Users—Show

At a single-story, wood-frame California residence, WavKong tested indoor and outdoor coverage, including a distant garden location where the V2700 measured 123 Mbps, versus 4.2 Mbps for the comparison Mesh configuration. Separate testing in other U.S. states included three-story wood-frame houses, reflecting the different layouts and distances households need Wi-Fi to reach.

Independent real-world comparisons also show why network design matters. Technology creator Jeff Springer compared one V2700 with a well-known Mesh Wi-Fi brand: the V2700 delivered higher speeds than an individual Mesh node at several distant locations. Against the full three-node Mesh setup, the V2700 was faster at two of four test locations, while the Mesh system led at the other two. The point is not that Mesh is inferior; it is that stronger individual wireless links can reduce the number of nodes needed in suitable homes.

Other early users reported meaningful coverage gains. An Australian customer who had used a router plus two Mesh nodes reported 5 GHz downloads exceeding 500 Mbps after switching to V2700, versus about 250 Mbps previously. Another user reported that a previously unreliable smart doorbell became more stable after six weeks of use.

Coverage and speed figures reflect WavKong’s internal tests or individual user reports under specific conditions. Actual results vary with walls and building materials, interference, router placement, client capabilities, and network configuration.

From Six Years of Engineering to Global Delivery

The V2700 launched on Kickstarter on April 22, 2026, earning “Project We Love” recognition within its first 24 hours. The campaign attracted 1,074 backers and raised HK$3,272,087 (more than US$400,000). WavKong completed Kickstarter fulfillment on September 29, following product validation, early-user testing, and the start of mass production.

“Great Wi-Fi should be invisible. People should enjoy reliable connectivity wherever life happens—upstairs, in the garage, out in the garden, or even at a security camera near the barn—without becoming networking experts,” said Dr. Ziming Wang, CEO of WavKong. “Wireless performance starts with the quality of the signal, not the number of devices. That is why we went back to the fundamentals of RF engineering, bringing base-station-grade digital signal processing into home Wi-Fi. Our goal is simple: stronger signals, wider coverage, and fewer nodes where possible. Technology should make connectivity effortless, not more complicated.”

The V2700 is available through WavKong’s official website, with shipping to supported markets. It supports Wi-Fi 6, 160 MHz channel bandwidth, WPA3 security, and router or access-point deployment.

Product information: https://wavkong.com

About WavKong

WavKong is a consumer technology brand of Digital Enhancement, dedicated to bringing advanced wireless innovations into everyday life. By integrating proprietary Digital RF algorithms and custom-designed processor chips into consumer products, WavKong transforms sophisticated wireless technologies into practical, easy-to-use solutions that deliver stronger performance, wider coverage, and more reliable connectivity.

View original content to download multimedia:https://www.prnewswire.com/news-releases/wavkong-v2700-takes-a-signal-first-approach-to-whole-home-wi-fi-302924947.html

SOURCE WavKong